【人物简介】

　　万敏，男，工学博士，西北工业大学机电学院副教授，入选西北工业大学“翱翔之星”人才培养计划，入选第26届世界名人录(26th Who`sWho in the World)。主要从事切削过程力学行为仿真与工艺参数优化等方面的研究工作，以骨干成员身份参与了国家自然科学基金重点项目、陕西省自然科学基金、十一五国家科技支撑计划等4余项课题的研究工作，主持科研项目4项，期间开展的研究工作紧密围绕铣削力建模及铣削过程建模展开，较为系统地研究了薄壁件铣削过程中铣削力的建模方法、表面误差的预测算法及误差控制技术等，已形成一套系统的分析思路。曾获陕西省第十届自然科学优秀学术论文奖三等奖。

【研究方向】

先进制造工艺中的基本力学问题。

【研究成果】

　　紧密围绕铣削力建模及铣削过程建模展开，较为系统地研究了薄壁件铣削过程中铣削力的建模方法、表面误差的预测算法及误差控制技术等，已形成一套系统的分析思路。

【科研项目】

　　1.国家自然科学基金，薄壁件铣削稳定性分析，主持人。 　　2.十一五国家科技支撑计划项目，航空航天难加工材料零件高性能数控刀具的开发，子项目负责人。 　　3.航空科学基金，航空材料高效瞬时铣削力建模方法研究，主持人。 　　4.陕西省自然科学基金，难加工材料铣削过程建模与动力学仿真，主持人。 　　5.国家自然科学基金杰出青年科学基金，计算固体力学与结构优化，骨干成员。 　　6.西工大基础研究基金，大型整体薄壁件铣削变形控制的关键技术研究，主持人。 　　7.西工大翱翔之星计划项目，复杂薄壁件铣削过程力学行为仿真与工艺参数优化，主持人。

【论文著作】

以下为第一作者代表性论文，统计数据截止于2015年9月16日。 [1] M. Wan; Y. Altintas; Mechanics and Dynamics of Thread Milling Process, Int. J. of Mach. Tools Manuf. 87 (2014) 16-26. [2] M. Wan, M.S. Lu, W.H. Zhang, Y. Yang, A New Ternary-Mechanism Model For The Prediction of Cutting Forces in Flat End Milling, Int. J. Mach. Tools Manuf. 57 (2012) 34-45. [3] M. Wan, Y.T. Wang, W.H. Zhang, Y. Yang, J.W. Dang, Prediction of Chatter Stability For Multiple-Delay Milling System Under Different Cutting Force Models, Int. J. Mach. Tools Manuf. 51 (2011) 281-295. [4] M. Wan, W.H. Zhang, J.W. Dang, Y Yang, A Unified Stability Prediction Method For Milling Process With Multiple Delays, Int. J. Mach. Tools Manuf. 50 (2010) 29-41.  [5] M. Wan, W.H. Zhang, J.W. Dang, Y Yang, New Procedures For Calibration of Instantaneous Cutting Force Coefficients and Cutter Runout Parameters in Peripheral Milling, Int. J. Mach. Tools Manuf. 49 (2009) 1144-1151. [6] M. Wan, W.H. Zhang, Systematic Study On Cutting Force Modelling Methods For Peripheral Milling, Int. J. Mach. Tools Manuf. 49 (2009) 424-432. [7] M. Wan, W.H. Zhang, G.H. Qin, Z.P. Wang, Strategies For Error Prediction and Error Control in Peripheral Milling of Thin-Walled Workpiece, Int. J. Mach. Tools Manuf. 48 (2008) 1366-1374. [8] M. Wan, W.H. Zhang, G. Tan, G.H. Qin, An In-Depth Analysis of The Synchronization Between The Measured and Predicted Cutting Forces For Developing Instantaneous Milling Force Model, Int. J. Mach. Tools Manuf. 47 (2007) 2018-2030. [9] M. Wan, W.H. Zhang, G.H. Qin, G. Tan, Efficient Calibration of Instantaneous Cutting Force Coefficients and Runout Parameters For General End Mills, Int. J. Mach. Tools Manuf. 47 (2007) 1767-1776. [10] M. Wan, W.J. Pan, W.H. Zhang, Y.C. Ma, Y. Yang; A Unified Instantaneous Cutting Force Model For Flat End Mills With Variable Geometries, J. of Mater. Process. Technol; 214 (2014) 641-650. [11] M. Wan, W.H. Zhang, Y. Yang, Phase Width Analysis of Cutting Forces Considering Bottom Edge Cutting and Cutter Runout Calibration in Flat End Milling of Titanium Alloy, J. Mater. Process. Technol. 211 (2011) 1852-1863. [12] M. Wan, W.H. Zhang, G. Tan, G.H. Qin, Systematic Simulation Procedure of Peripheral Milling Process of Thin-Walled Workpiece, J. Mater. Process. Technol. 197 (2008) 122-131. [13] M. Wan, W.H. Zhang, Efficient Algorithms For Calculations of Static Form Errors in Peripheral Milling, J. Mater. Process. Technol. 171 (2006) 156-165. [14] M. Wan, W.H. Zhang, J.W. Dang, Y Yang, A Novel Cutting Force Modelling Method For Cylindrical End Mill, Appl. Math. Modelling 34 (2010) 823-836. [15] M. Wan, W.H. Zhang, Calculations of Chip Thickness and Cutting Forces in Flexible End Milling, Int. J. Adv. Manuf. Technol. 29 (2006) 637-647. [16] M. Wan, Y.C. Ma, W.H. Zhang, Y. Yang, Study On The Construction Mechanism of Stability Lobes in Milling Process With Multiple Modes. Adv. Manuf. Technol.79 (201 5)589-603. [17] M. Wan; Z. Kilic, M; Y. Altintas, Mechanics and Dynamics of Multifunctional Tools; Asme J. Manuf. Sci. Eng.137 (2015) 011019. [18] M. Wan, W.H. Zhang, K.P. Qiu, T. Gao, Y. H. Yang, Numerical Prediction of Static Form Errors in Peripheral Milling of Thin-Walled Workpieces With Irregular Meshes, Asme J. Manuf. Sci. Eng. 127 (2005) 13-22. [19] M. Wan, W.H. Zhang, G.H. Qin, Z.P. Wang, Consistency Study On Three Cutting Force Modeling Methods For Peripheral Milling, Imeche J. Eng. Manuf. 222 (2008) 665-676. [20] M. Wan, W.H. Zhang, G. Tan, G.H. Qin, New Algorithm For Calibration of Instantaneous Cutting-Force Coefficients and Radial Run-Out Parameters in Flat End Milling, Imeche J. Eng. Manuf. 221 (2007) 1007-1019. [21] M. Wan, W.H. Zhang, G. Tan, G.H. Qin, New Cutting Force Modeling Approach For Flat End Mill, Chin. J. Aero. 20 (2007) 282-288.