【人物简介】

　　刘郁丽，1965年生，工学博士，教授，博士生导师。1986年7月获西安交通大学金属塑性加工专业工学学士学位。1986年7月至1988年8月在太原科技大大学金属塑性加工专业从事教学和科研工作。在此期间，参加了全国高等学校试用教材《冲模图册》的编写工作。1988年9月至1991年6月在西安交通大学金属塑性加工专业攻读并获得工学硕士学位。1991年7月至今在西北工业大学材料学院工作。2001年4月获西北工业大学材料加工工程学科工学博士学位。2004年晋升为教授，2005年被遴选为材料加工工程学科博士生导师。 国家“985工程”一级科技创新平台精确塑性成形团队骨干成员。担任《中国材料工程大典》《材料塑性成形工程》卷《板料冲压成形》篇主编。陕西省优秀博士学位论文获得者，曾获西北工业大学优秀青年教师称号。

【研究方向】

主要研究方向为材料精确塑性成形技术及计算机仿真。

【研究成果】

　　在薄壁矩形管精确塑性弯曲成形和复杂形状叶片精锻成形等方面取得一定的研究进展。 　　发表学术论文80余篇，被SCI、EI和ISTP收录60余篇。

【科研项目】

　　近年来，主持国家自然科学基金、航空科学基金和国家重点实验室基金各2项，参加国家杰出青年基金、国家自然科学基金重点项目和总装备部预先研究项目等课题的研究工作。

【论文著作】

1. 抽芯对H96薄壁矩形波导管绕弯成形回弹的影响 , 2013,21(1),56-61 ,DOI:, ISSN:1005-0299 2. B550CL高强钢轮辐拉深冲孔变形及损伤 , 2015,22(6),58 ,DOI:, ISSN:1007-2012 3. Deformation behaviors of double-ridged rectangular H96 tube in rotary draw bending under different mandrel types , SPRINGER LONDON LTD,2016,82(9-12),1569-1580 ,DOI:10.1007/s00170-015-7468-5, ISSN:0268-3768 4. Effect of Geometry Parameters on Cross-Sectional Distortion of Thin-Walled Rectangular Tube in Rotary-Draw Bending Process , TRANS TECH PUBLICATIONS LTD,2011,189-193,2784-2787 ,DOI:10.4028/www.scientific.net/AMR.189-193.2784, ISSN:1022-6680 5. Multi-scale Through-process Modeling and Simulation in Precision Forming of Complex Components of Difficult-to-deform Material , AMER INST PHYSICS,2013,1532,150-157 ,DOI:10.1063/1.4806819, ISSN:0094-243X 6. TC4叶片精锻过程中摩擦对模具应力及温度场的影响 , 2010,20(z1),452-456 ,DOI:, ISSN:1004-0609 7. 叶片精锻三维有限元反向模拟脱模准则的确定 , 2006,(2),18-23 ,DOI:10.3969/j.issn.1001-196X.2006.02.005, ISSN:1001-196X 8. Experimental study of the deformation laws of hemispherical parts in the compound-forming process , ELSEVIER SCIENCE SA,1998,74(1-3),190-194 ,DOI:10.1016/S0924-0136(97)00267-7, ISSN:0924-0136 9. Influence of dynamic boundary conditions on preform design for deformation uniformity in backward simulation , ELSEVIER SCIENCE SA,2008,197(1-3),255-260 ,DOI:10.1016/j.jmatprotec.2007.06.031, ISSN:0924-0136 10. Cross-sectional distortion behaviors of thin-walled rectangular tube in rotary-draw bending process , ELSEVIER SCIENCE BV,2010,20(3),484-489 ,DOI:10.1016/S1003-6326(09)60166-7, ISSN:1003-6326 11. Analysis of wrinkling limit of rotary-draw bending process for thin-walled rectangular tube , ELSEVIER SCIENCE SA,2010,210(9),1224-1231 ,DOI:10.1016/j.jmatprotec.2010.03.009, ISSN:0924-0136 12. Effect of clearance on wrinkling of thin-walled rectangular tube in rotary draw bending process , SPRINGER LONDON LTD,2010,50(1-4),85-92 ,DOI:10.1007/s00170-009-2508-7, ISSN:0268-3768 13. Experimental study on cross-section distortion of thin-walled rectangular 3A21 aluminium alloy tube by rotary draw bending , INDERSCIENCE ENTERPRISES LTD,2011,42(1-2),110-120 ,DOI:10.1504/IJMPT.2011.044888, ISSN:0268-1900 14. Development and application of the material constitutive model in springback prediction of cold-bending , ELSEVIER SCI LTD,2012,42,245-258 ,DOI:10.1016/j.matdes.2012.05.043, ISSN:0261-3069 15. Springback Prediction Model Considering the Variable Young's Modulus for the Bending Rectangular 3A21 Tube , SPRINGER,2013,22(1),9-16 ,DOI:10.1007/s11665-012-0227-y, ISSN:1059-9495 16. Improvement of the accuracy and the computational efficiency of the springback prediction model for the rotary-draw bending of rectangular H96 tube , PERGAMON-ELSEVIER SCIENCE LTD,2013,66,224-232 ,DOI:10.1016/j.ijmecsci.2012.11.012, ISSN:0020-7403 17. Springback prediction for rotary-draw bending of rectangular H96 tube based on isotropic, mixed and Yoshida-Uemori two-surface hardening models , ELSEVIER SCI LTD,2013,47,200-209 ,DOI:10.1016/j.matdes.2012.12.018, ISSN:0261-3069 18. Relations between the stress components and cross-sectional distortion of thin-walled rectangular waveguide tube in rotary draw bending process , SPRINGER LONDON LTD,2013,68(1-4),651-662 ,DOI:10.1007/s00170-013-4786-3, ISSN:0268-3768 19. Experimental study on the effect of dies on wall thickness distribution in NC bending of thin-walled rectangular 3A21 aluminum alloy tube , SPRINGER LONDON LTD,2013,68(5-8),1867-1874 ,DOI:10.1007/s00170-013-4983-0, ISSN:0268-3768 20. An analytical model for the collapsing deformation of thin-walled rectangular tube in rotary draw bending , SPRINGER LONDON LTD,2013,69(1-4),627-636 ,DOI:10.1007/s00170-013-5042-6, ISSN:0268-3768 21. Comparison between the effects of PVC mandrel and mandrel-cores die on the forming quality of bending rectangular H96 tube , PERGAMON-ELSEVIER SCIENCE LTD,2013,76,132-143 ,DOI:10.1016/j.ijmecsci.2013.09.011, ISSN:0020-7403 22. Prediction of forming limit based on cross-sectional distortion for rotary draw bending of H96 brass double-ridged rectangular tube , SPRINGER LONDON LTD,2014,71(5-8),1445-1454 ,DOI:10.1007/s00170-013-5552-2, ISSN:0268-3768 23. Experimental and FE Simulation Study on Cross-Section Distortion of Rectangular Tube under Multi-Die Constraints in Rotary Draw Bending Process , KOREAN SOC PRECISION ENG,2014,15(4),633-641 ,DOI:10.1007/s12541-014-0381-2, ISSN:2234-7593 24. Research on cross-sectional deformation of double-ridged rectangular tube during H-typed rotary draw bending process , SPRINGER LONDON LTD,2014,73(9-12),1789-1798 ,DOI:10.1007/s00170-014-5968-3, ISSN:0268-3768 25. Global sensitivity analysis and coupling effects of forming parameters on wall thinning and cross-sectional distortion of rotary draw bending of thin-walled rectangular tube with small bending radius , SPRINGER LONDON LTD,2014,74(5-8),581-589 ,DOI:10.1007/s00170-014-6014-1, ISSN:0268-3768 26. Effect of mandrel-cores on springback and sectional deformation of rectangular H96 tube NC bending , SPRINGER LONDON LTD,2015,78(1-4),351-360 ,DOI:10.1007/s00170-014-6657-y, ISSN:0268-3768 27. Optimal design of process parameters of rotary-draw bending process for thin-walled rectangular tube of aluminum alloy , SAGE PUBLICATIONS LTD,2014,228(11),1442-1448 ,DOI:10.1177/0954405413518518, ISSN:0954-4054 28. H96黄铜双脊矩形管绕弯应力演变规律 , 2015,(10),1209-1212,1224 ,DOI:, ISSN:2095-2783 29. Effects of geometrical parameters on wrinkling of thin-walled rectangular aluminum alloy wave-guide tubes in rotary-draw bending , ELSEVIER SCIENCE INC,2013,26(1),242-248 ,DOI:10.1016/j.cja.2012.12.003, ISSN:1000-9361 30. 采用Bézier曲面生成叶片锻造三维有限元模拟的模具网格 , 2000,18(1),87-89 ,DOI:10.3969/j.issn.1000-2758.2000.01.021, ISSN:1000-2758 31. 工艺参数对薄壁矩形管绕弯成形失稳起皱影响的显著性分析 , 2010,39(13),77-80 ,DOI:10.3969/j.issn.1001-3814.2010.13.026, ISSN:1001-3814 32. 带阻尼台叶片精锻过程卸载冷却对形状偏差的影响 , 2011,30(12),2111-2115 ,DOI:, ISSN:1003-8728 33. 铝合金薄壁矩形管绕弯成形起皱极限的预测 , 2011,34(1),47-52 ,DOI:, ISSN:1000-582X 34. H96黄铜薄壁矩形管绕弯回弹和截面畸变对工艺参数的敏感性 , 2012,22(9),2233-2240 ,DOI:, ISSN:1003-6326 35. H96黄铜双脊矩形波导管绕弯截面变形特征研究 , 2013,33(6),13-19 ,DOI:10.3969/j.issn.1005-5053.2013.6.003, ISSN:1005-5053 36. 单榫头叶片锻造过程应力应变场的三维有限元分析 , 2002,20(1),137-140 ,DOI:10.3969/j.issn.1000-2758.2002.01.033, ISSN:1000-2758 37. 叶片精锻三维刚粘塑性有限元模拟系统的研究 , 2003,21(1),106-109 ,DOI:10.3969/j.issn.1000-2758.2003.01.027, ISSN:1000-2758 38. 单榫头叶片锻造过程成形缺陷分析 , 2003,22(2),283-284,288 ,DOI:10.3321/j.issn:1003-8728.2003.02.037, ISSN:1003-8728 39. 带阻尼台叶片多向模锻过程场量分布规律研究 , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2010,18(2),159-163 ,DOI:, ISSN:1005-0299 40. Research on distribution laws of wall thickness of aluminum alloy thin-walled rectangular tube in rotary-draw bending process , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2010,18(SUPPL. 1),1-4 ,DOI:, ISSN:10050299 41. 单榫头叶片叶身精锻成形规律 , Editorial Office of Chinese Journal of Mechanical Engineering,2002,38(6),111-114 ,DOI:10.3321/j.issn:0577-6686.2002.06.024, ISSN:0577-6686 42. 摩擦对叶片精锻预成形毛坯放置位置影响规律的研究 , Editorial Office of Chinese Journal of Mechanical Engineering,2003,39(1),97-100 ,DOI:10.3321/j.issn:0577-6686.2003.01.021, ISSN:0577-6686 43. 芯棒对铝合金矩形管绕弯回弹作用的数值模拟 , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2012,20(1),38-43 ,DOI:, ISSN:1005-0299 44. 芯模参数对3A21矩形管绕弯截面变形的影响研究 , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2012,20(6),97-102 ,DOI:, ISSN:1005-0299 45. 间隙对薄壁矩形管绕弯成形截面畸变影响的研究 , China Mechanical Engineering Magazine Office, Wuchang, 430070, China,2008,19(16),1972-1975 ,DOI:10.3321/j.issn:1004-132X.2008.16.019, ISSN:1004-132X 46. 金属塑性成形三维有限元模拟过程中修正触模节点位置的一种新方法 , Beijing Res Inst Mech Electr Technol, Beijing, China,2000,7(2),62-65 ,DOI:10.3969/j.issn.1007-2012.2000.02.017, ISSN:1007-2012 47. 压块对H96矩形管绕弯成形回弹与截面变形的作用 , Central South University of Technology,2014,24(1),104-114 ,DOI:, ISSN:1004-0609 48. 基于多场耦合分析的TC4叶片精锻成形的微观组织模拟 , Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2007,14(4),64-68 ,DOI:10.3969/j.issn.1007-2012.2007.04.014, ISSN:1007-2012 49. 薄壁矩形管弯曲过程截面畸变的三维有限元分析 , Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2007,14(3),72-75 ,DOI:10.3969/j.issn.1007-2012.2007.03.018, ISSN:1007-2012 50. 上模压下速度对带阻尼台叶片精锻影响的研究 , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2007,15(6),792-796 ,DOI:10.3969/j.issn.1005-0299.2007.06.014, ISSN:1005-0299 51. 材料参数对3A21矩形管弯曲回弹的敏感性分析 , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2011,19(5),1-5 ,DOI:, ISSN:1005-0299 52. H96黄铜薄壁矩形管绕弯回弹和截面畸变对工艺参数的敏感性 , ELSEVIER SCIENCE BV,2012,22(9),2233-2240 ,DOI:10.1016/S1003-6326(11)61454-4, ISSN:1003-6326 53. Research on precision forging law of complicated blade by using 3D FE simulation and physical modeling , TRANS TECH PUBLICATIONS LTD,2004,471-472,839-843 ,DOI:, ISSN:0255-5476 54. B550CL高强钢轮辐反拉深-翻边复合成形损伤开裂研究 , 2014,,119-123 ,DOI:, ISSN: 55. 铝合金薄壁矩形管绕弯成形壁厚分布规律研究 , 2010,,1-4 ,DOI:, ISSN: 56. Wrinkling limit prediction of rotary-draw bending process for thin-walled rectangular aluminum alloy tube , Editorial Board of Journal of Chongqing University, 174 Shazhengjie, Shapingba District, Chongqing, 400030, China,2011,34(1),47-52 ,DOI:, ISSN:1000582X 57. Effects of process parameters on the temperature field in Ti-6Al-4V alloy blade precision forging process , Chinese Society of Metals,2006,22(4),473-477 ,DOI:, ISSN:10050302 58. 3-D FEM analysis of section distortion in bending process of the thin-walled rectangular tube , Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2007,14(3),72-75 ,DOI:, ISSN:10072012 59. Microstructure simulation of TC4 blade precision forging process based on multiple field coupling analysis , Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2007,14(4),64-68 ,DOI:, ISSN:10072012 60. Influence of the upper die velocity on the precision forging process of the blade with a damper platform , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2007,15(6),792-796 ,DOI:, ISSN:10050299 61. Sensitivity analysis of material parameters on spring-back of 3A21 aluminum alloy rectangular tube in the bending process , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2011,19(5),1-5 ,DOI:, ISSN:10050299 62. Establishment of springback prediction model for the rotary-draw bending of thin-walled rectangular tube considering variation of young?s modulus , World Scientific Publishing Co. Pte. Ltd, 5 Toh Tuck Link, Singapore, 596224, Singapore,2011,,188-194 ,DOI:, ISSN:9789814324045 63. 轻量化材料与构件精确塑性成形先进技术研究进展 , 2008,,835-841 ,DOI:, ISSN: 64. 有限元反向模拟的新算法 , 2006,,1981-1984 ,DOI:, ISSN: 65. 芯棒伸出量对薄壁矩形管弯曲失稳起皱影响的数值模拟 , 2006,,35-37,66 ,DOI:, ISSN: 66. TC4合金带阻尼台叶片精锻过程微观组织演变规律 , 2008,,339-342 ,DOI:, ISSN: 67. 基于有限元数值模拟的叶片精锻工艺参数优化 , 0,,208-211 ,DOI:, ISSN: 68. 薄壁矩形管弯曲过程截面畸变的三维有限元分析 , 2006,,140-143 ,DOI:, ISSN: 69. A new method to accurately describe cross-section distortion in rotary draw bending process of thin-walled rectangular tube , Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany,2012,117-119,1839-1842 ,DOI:10.4028/www.scientific.net/AMM.117-119.1839, ISSN:9783037852804 70. Influence of friction on cross-sectional distortion in rotary draw bending process of thin-walled rectangular tube , Hanrimwon Publishing Co., 206-3 Ojang-dong, Jung-gu,, Seoul, 100-310, Korea, Republic of,2008,,1034-1040 ,DOI:, ISSN:9788957081525 71. Visualization method of 3D finite element simulation based on AutoCAD , Sci Publ House,1999,(6),9-11, 27 ,DOI:, ISSN:1001196X 72. Field-variable distribution laws of the blade with a damper platform during multi-directional forging process , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2010,18(2),159-163 ,DOI:, ISSN:10050299 73. Advances in control of unequal deformation by locally loading and theories related to precision plastic forming , Beijing Res. Inst. of Mechanical and Elec. Technology, Beijing, 100083, China,2008,15(2),6-14 ,DOI:, ISSN:10072012 74. Influence of loading mode on the multi-directional forging of the blade with a damper platform , Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China,2012,1,346-349 ,DOI:, ISSN:9787030338990 75. TC4叶片精锻过程中摩擦对模具应力及温度场的影响 , 2010,,452-456 ,DOI:, ISSN: 76. Research on distribution laws of wall thickness of aluminum alloy thin-walled rectangular tube in rotary-draw bending process , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2010,18(SUPPL. 1),1-4 ,DOI:, ISSN:10050299 77. Impact of pressure die on springback and section deformation of rotary-draw bending of rectangular H96 tube , Central South University of Technology,2014,24(1),104-114 ,DOI:, ISSN:10040609 78. New method of modifying the node touching on the die during 3-D FEM simulation of the metal plastic forming , Beijing Res Inst Mech Electr Technol, Beijing, China,2000,7(2),62-65 ,DOI:, ISSN:10072012 79. Research on the influence of friction on setting position of preform billet in precision forging process of blade , Editorial Office of Chinese Journal of Mechanical Engineering,2003,39(1),97-100 ,DOI:, ISSN:05776686 80. Forming laws of blade body in precision forging process of blade with a tenon , Editorial Office of Chinese Journal of Mechanical Engineering,2002,38(6),111-114 ,DOI:, ISSN:05776686 81. On improving visualization of forging process with 3D FEM mesh , NPU, Xi''an, China,1998,16(4),641-644 ,DOI:, ISSN:10002758 82. CAD of blade forging die , 1998,10(5),446-449 ,DOI:, ISSN:10039767 83. General software for pre-processing of three-dimensional FEM , 1998,17(2),323-324, 328 ,DOI:, ISSN:10038728 84. Effect of clearance on cross section distortion of thin-walled rectangular tube in rotary draw bending process , China Mechanical Engineering Magazine Office, Wuchang, 430070, China,2008,19(16),1972-1975 ,DOI:, ISSN:1004132X 85. Influence of mandrel parameters on cross-section deformation of 3A21 rectangular tube in rotary-draw bending process , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2012,20(6),97-102 ,DOI:, ISSN:10050299 86. Prediction of grain size for blade precision forging process under thermo-mechanical coupling , Chinese Society of Metals,2003,19(SUPPL.),156-158 ,DOI:, ISSN:10050302 87. Method of obtaining deformation information by tracing deformation from sections for 3D FE simulation , Chinese Society of Metals,2003,19(SUPPL.),65-68 ,DOI:, ISSN:10050302 88. Numerical simulation of effects of mandrel on spring-back of aluminum alloy rectangular tube in rotary-draw bending process , Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China,2012,20(1),38-43 ,DOI:, ISSN:10050299 89. Development of 3D FE simulation system 3D-PFS for metal plastic forming process , Harbin Institute of Technology,2005,13(4),402-406 ,DOI:, ISSN:10050299 90. Novel algorithm for backward simulation using FEM , China Mechanical Engineering Magazine Office, Wuchang, China,2006,17(19),1981-1983 ,DOI:, ISSN:1004132X